Ouvis VZ1 User Manual

1.
Power on the camera and connect to your router
a)
Plug the camera into the electric power outlet
cable in one of the LAN ports of the
b)
After a short pause, the camera will shake its head and begin to self
light turns green,
after self
2. D
ownload and install
a)
Scan the QR code to download Ouvis app, or go to the Apple App Store or Google Play
search for the word “Ouvis” and install the Ouvis app. That looks like this:
iOS
b)
Open the app and you will be on the “Home Page”
3. Search and
add the camera
a) Click "Add Device"
to open the
MODEL: Ouvis VZ1
Power on the camera and connect to your router
Plug the camera into the electric power outlet
, and
connect one end of the Ethernet
cable in one of the LAN ports of the router, and the other end in the back of the camera
After a short pause, the camera will shake its head and begin to self
-
test
after self
-checking, the indicator light blinks itself.
ownload and install
the Ouvis app
Scan the QR code to download Ouvis app, or go to the Apple App Store or Google Play
search for the word “Ouvis” and install the Ouvis app. That looks like this:
Android
Open the app and you will be on the “Home Page”
.
add the camera
to open the
"Add Device" page.
connect one end of the Ethernet
router, and the other end in the back of the camera
.
test
, the indicator
Scan the QR code to download Ouvis app, or go to the Apple App Store or Google Play
,
search for the word “Ouvis” and install the Ouvis app. That looks like this:

Ouvis VZ1 Specifications

General

Sensor Type	CMOS
Optical Zoom	5x
Digital Zoom	4x
Image Sensor	1/2.3-inch CMOS
ISO	100 / 200 / 400 / 800 / 1600 / 3200
ISO Range	ISO 100-3200
Image Resolution	4608 x 3456
Storage Media	SDHC
Battery Type	Li-ion
Shutter Speed	1/2000 sec
Lens Type	Zoom lens
Effective Pixels	16.1 MP

Summary

Power on the camera and connect to your router

Connect Power and Ethernet Cable

Plug the camera into the electric power outlet and connect the Ethernet cable to the router and camera.

Camera Self-Test and Indicator Light

The camera shakes its head, self-tests, and the indicator light turns green, then blinks.

Download and install the Ouvis app

Obtain the Ouvis App

Scan the QR code or search the Apple App Store/Google Play for the "Ouvis" app.

Launch the Ouvis App

Open the Ouvis app to access the "Home Page".

Search and add the camera

Initiate Device Addition

Click "Add Device" to navigate to the "Add Device" page.

Perform LAN Search

Click "LAN Search" to find online Ouvis cameras on the local network.

Select Camera from Search Results

Click on the camera name (e.g., "WIFICAM") in the search results.

Input Device Information

Enter device details, using "admin" for User and leaving Password blank.

Confirm Camera Online Status

Verify "WIFICAM" shows "On Line" on the "Home Page" after adding.

Configure the Wi-Fi connection of the camera

Ensure Smartphone Wi-Fi Connection

Confirm your smartphone is connected to the router's 2.4G Wi-Fi band.

Access Camera Settings

On the Home Page, click the "GEAR" icon next to the online camera.

Initiate Wi-Fi Network Scan

Select "Wi-Fi Setting", then "Wi-Fi Network List" to find available networks.

Select Your Wi-Fi Network

Choose the same Wi-Fi network your smartphone is connected to.

Enter Wi-Fi Password

Input the correct password for your selected Wi-Fi network.

Finalize Wi-Fi Setup and Reboot

Click "Done", camera reboots, indicator light shows status, and it becomes wireless.

Creating the camera password to ensure your privacy

Access User Settings

Click the yellow warning icon on the "Home Page" to access "User Setting".

Set Administrator Password

Enter a new password for the Administrator and click "Done".

Confirm Password Change

Camera reboots, logs in with new password, and the warning icon disappears.