EN
You can lock (stop motors) the drone in two ways:
1. Hold the lock key for about 3 seconds. Motors will stop and the
drone will be locked.
2. After the drone has landed on the ground, direct the choke valve bar
downwards for about 3 seconds. Motors will stop and the drone will
be locked.
NOTE: Do not stop the drone motors with key during the flight because
the drone will fall.
How to control the drone
To control the drone, move bars on the remote control, as presented in
the figures.
The figures present bars in the default control mode 2.
Fig. 22
A – lift
B - drop
C – fly forward
D – fly backward
Fig. 23
E – turn right
F – turn left
G – fly left
H – fly right
How to take o/land
1. After you have started motors, press to make the drone take o
automatically and keep a permanent altitude of 1,5 meters above
the ground.
To Next Page
Loading...
