EN
Troubleshooting
1 After the flight, the drone cannot
remain horizontal in the air, it tilts
to one side.
Position the drone on a flat and
horizontal surface. Calibrate the
gyroscope.
2 The drone vibrates abnormally. The airscrew may be deformed.
Please replace it.
3 Impossible to unlock the drone,
the light on the rear LED flashes
fast.
The battery is about to go flat,
please charge it.
How to clean and maintain
1. Do not use chemicals to clean the drone.
2. Do not use water to clean the drone.
3. To clean the drone and its accessories, switch the device o, remove
the battery and wipe with a dry cloth.
4. The drone and its elements must be stored in a dry place, remember
to keep it out of reach of children.
Note: Temperature fluctuations can cause water to condense in the device.
Device operating temperature: from 5°C to 40°C.
Class 4 wind resistance (max. 7.9 m/s).
The pictures are for reference only. The real design of the products may dier from the pictures
presented.
To Next Page
Loading...
