EN
The drone uses 5GHz Wi-Fi. Make sure your device with application supports
this standard, otherwise you will not be able to connect to the drone.
Controller status indicators
Controller status Description
1 Signal strength indicator switches
between strong and weak.
Controller loses signal.
2 Controller light indicators flash
slowly, the remote control emits
a sound, and battery indicator
flashes on the LCD screen.
Flat battery of the controller,
you have to charge it.
3
Battery indicator is as follows:
,
dadditionally it emits a sound.
The drone battery goes flat
gradually. If the drone flight
altitude exceeds 30 meters
and the distance between
the drone and controller
exceeds 100 meters - the
drone will return to the spot
marked as „home”.
4
Battery indicator is as follows:
and the device emits a constant
long sound.
Drone battery is flat.
The drone will return
automatically if its altitude
exceeds 15 m or its distance
exceeds 15 m. If the distance
is lower, the drone will land
instantly.
5 The signal strength on the display
shows fewer than two points or
shows no point, the device emits
a constant long sound.
1. Distance between the
drone and remote control
is too long, which aects
the signal quality.
2. Drone battery has been
removed after pairing
with the remote control.
To Next Page
Loading...
