Ovlac Mini - PLOUGHING DEPTH AND DEPTH CONTROL; TRANSPORT AND PARKING PROCEDURES

11
6. TRANSPORT AND PARKING
In order to ease transport, the plough should be drawn to its
minimum width by means of the width control system (turnbuckle or
hydraulic cylinder), Fig.10.
The stand P guarantees a steady position when the plough is
parked.
Fig.9
Fig.10
5. PLOUGHING DEPTH
The ploughing depth is adjusted through the hydraulic lever of the
tractor. Nevertheless, obtain an even depth, all ploughs can be
equipped with a depth control wheel (Fig.10) whose height is adjusted
by the bolts.
There is a relation between depth and width which should be
respected in order to achieve a good result.
The following chart gives an excellent reference which, if complied,
will lead to satisfactory results.