OWC Mercury Elite Pro Dual mini Assembly Manual

OWC Mercury Elite Pro Dual mini Chapter 2 - System Setup
2.1 Hard Drive Assembly & Installation (continued)
➂
From the rear of the enclosure, press inwards on the rear ports to slide the
inner chassis out towards the front of the enclosure.
Once the inner chassis is removed from the outer shell, you will see where
your 2.5” SATA drives will attach to the bridge card.
➃
➙

OWC Mercury Elite Pro Dual mini Specifications

General

Brand	OWC
Model	Mercury Elite Pro Dual mini
Category	Storage
Language	English