OWC Mercury Elite Pro Dual Assembly Manual And User Guide

OWC MERCURY ELITE PRO DUAL
INTRODUCTION
1
INTRODUCTION
1.1 MINIMUM SYSTEM REQUIREMENTS
1.1.1 Apple® Mac Requirements
•PowerPC G4 CPU, 128MB RAM
•USB 2.0: Mac OS X 10.2 or later
•USB 3.0: Mac OS X 10.6 or later
•Thunderbolt™ port: Mac OS X 10.6 or later
1.1.2 PC Requirements
•500MHz Intel® Pentium® 3 CPU, 128MB RAM
•USB 2.0: Windows XP or later
•USB 3.0: Windows XP or later
•Thunderbolt™ port: Windows 7 or later
1.1.3 Supported Drives
•3.5” SATA hard drives
NOTE: Drives of identical model and capacity are required for RAID 0 and RAID 1.
1.2 PACKAGE CONTENTS
Mercury Elite Pro
Dual
Power Supply and
cable
Thunderbolt cableUSB 3.0 (Standard-A
to Standard-B) cable
1.3 ABOUT THIS MANUAL
Firmware, images, and descriptions may vary slightly between this manual and the unit
shipped. Functions and features may change depending on the firmware version. Please
visit the product webpage for the most recent product specifications.

OWC Mercury Elite Pro Dual Specifications

General

Hot-swap	Yes
RAID levels	0, 1
Storage drive size	3.5 \
Total storage capacity	8000 GB
Number of storage drives supported	2
Interface	Thunderbolt
Product color	Aluminum
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	5 - 42 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	8 - 90 %
Cache internal	128 MB

Weight and Dimensions

Depth	228.6 mm
Width	71.2 mm
Height	133.4 mm