OWC Mercury Elite Pro Dual Assembly Manual And User Guide

OWC MERCURY ELITE PRO DUAL
INTRODUCTION
2
1.4 FRONT VIEW
1.4.1 LED Indicators
Power — This LED will emit a solid blue light
when the Mercury Elite Pro Dual is on. During
drive activity the LED will blink blue steadily, and
during a rebuild the LED will pulse blue slowly.
HDD1/HDD2 — These LEDs represent the two
hard disk drives (HDDs) inside the Mercury Elite
Pro Dual. During normal activity, these LEDs will
remain off. If one of the hard drives inside the
Mercury Elite Pro Dual fails, or if one of the drives
is removed without the RAID mode being reset,
the corresponding LED will blink red.
1.5 REAR VIEW
Power HDD2HDD1
1
4
5
6
2
3

OWC Mercury Elite Pro Dual Specifications

General

Hot-swap	Yes
RAID levels	0, 1
Storage drive size	3.5 \
Total storage capacity	8000 GB
Number of storage drives supported	2
Interface	Thunderbolt
Product color	Aluminum
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	5 - 42 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	8 - 90 %
Cache internal	128 MB

Weight and Dimensions

Depth	228.6 mm
Width	71.2 mm
Height	133.4 mm