OWC MERCURY ELITE PRO MINI User Guide

OWC MERCURY ELITE PRO MINI
INTRODUCTION
2
1.4.1 Rear Features
1. USB 3.0 port — Attach the included USB 3.0 (Standard-A to Micro-B) cable here.
2. On/o switch — Turn on and off the Mercury Elite Pro mini here.
3. Power input — Connect the optional 5V power adapter here (sold separately).
NOTE:
•The Mercury Elite Pro mini is designed to receive all needed power through the
USB cable, therefore a separate power adapter is not necessary and not included.
For the few situations in which external power may be necessary, an optional 5V
power adapter is available at: http://eshop.macsales.com/item/OWC/
MOTGPWR/
•Even when the optional 5V power adapter is not connected, the on/off switch must
be in the ‘on’ position in order to use the Mercury Elite Pro mini.
•For the safe removal of your drive and to ensure that no data is lost, always eject or
unmount the drive from your operating system before powering off.
1.5 LED INDICATOR
The Mercury Elite Pro mini has a blue LED behind the front grill. The LED emits a solid
blue light when the unit is powered on and flashes during drive activity.

OWC MERCURY ELITE PRO MINI Specifications

General

Compatible operating systems	Windows MacOS Linux
Supported storage drive interfaces	Serial ATA
FireWire 400	Yes
USB 2.0 ports quantity	1
Cables included	eSATA, FireWire, USB
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 70 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Material	Aluminum
Product color	Silver
Data transfer rate	3 Gbit/s

Weight and Dimensions

Depth	139.7 mm
Width	96.52 mm
Height	27.94 mm
Weight	330 g