Need help?Do you have a question about the OWC ThunderBlade V4 and is the answer not in the manual?
General| Interface | Thunderbolt 3 |
|---|---|
| Read Speed | up to 2800MB/s |
| Write Speed | Up to 2450 MB/s |
| SSD Type | NVMe |
| Compatibility | macOS, Windows |
| Capacity | 8TB |
| Form Factor | External |
| Power | Bus-powered |
Specifies the Mac and PC host requirements for using the OWC ThunderBlade V4, including OS versions and Thunderbolt 3 port needs.
Lists the items included in the OWC ThunderBlade V4 package, such as the device, Thunderbolt 3 cable, and power supply.
Provides initial steps for connecting the ThunderBlade V4, driver information, and explains the device's LED indicator behavior.
Explains potential variations in images and descriptions due to firmware or OS updates, and directs users to the product web page for details.
Identifies the LED array on the front of the OWC ThunderBlade V4, indicating power and disk activity.
Details the ports on the rear of the ThunderBlade V4, including dual Thunderbolt 3 ports, power input, and ambient light sensor.
Describes the pre-installed RAID 0 configuration for Mac using SoftRAID XT and recommends installing the latest SoftRAID application.
Step-by-step instructions for formatting the OWC ThunderBlade V4 on a Windows PC, including disk management and volume creation.
Provides solutions for the computer not recognizing the drive, checking cable connections, and using alternative ports or cables.
Suggests keeping two copies of data, one on the ThunderBlade V4 and another on a separate medium, for data protection.
Provides phone numbers, chat, and email contact details for OWC technical support, including operating hours.
To Next Page