OWC ThunderBlade V4 - Page 10

OWC ThunderBlade V4
Mac & PC Setup
8
10. From the ‘Assign Drive Letter or Path’ dialog, leave the default setting intact.
A drive letter will automatically be chosen, then click the ‘Next’ button.
11. From the ‘Format Volume’ dialog, choose the “Format this volume with the
following settings” option, then make sure the following are selected: File
System: NTFS; Allocation unit size: Default (unless you have a specic reason
to use a dierent setting); Volume label: type a name here; and ‘Perform a
quick format’ should be checked as well. Do not enable compression.
Click the ‘Next’ button.