OWC ThunderBlade V4
Mac & PC Setup
9
12. The wizard’s summary screen will appear. Click the ‘Finish’ button. You will
then be asked by Disk Management if you are sure you want to continue.
Click ‘Yes’. Once the formatting process is complete, the ThunderBlade V4
will be visible in the Windows File Explorer. This concludes the PC formatting
and RAID 0 setup process.
Notice: Windows 10 does not currently have a method of ejecting
Thunderbolt storage devices. Before disconnecting the ThunderBlade V4
from the host computer, please check the LED on the front of the drive to
make sure no disk activity is in progress.
To Next Page
Loading...
