20 GB/IE
Displaying temperature
The LC display shows the indoor temperature
6
and the outdoor temperature
2
.
Press and hold down the SELECT button
19
for approx. 3 seconds. The °C dis-
play flashes.
Press the SET / RESET button
20
to switch
between the °C (Celsius) and °F (Fahr-
enheit) temperature scales.
Press the SELECT button to confirm your
settings.
Calling up the minimum /
maximum values
The temperature station stores the maximum
and minimum values of the outdoor sensor
and of the temperature station itself.
Press the SELECT button
19
to display the
maximum values of the indoor and out-
door temperature.
Press the SELECT button again to display
the minimum values of the indoor and
outdoor temperature.
Press the SET / RESET button
20
while the
maximum and minimum values, are being
displayed to reset the values.
Press the SELECT button, to return to the
default display.
To Next Page
Loading...
Need help?
General
