OWIM HG05124B - Start-Up; Setting up the Products

12 GB
In the event of a leakage of batteries / rechargeable batteries,
immediately remove them from the product to prevent damage.
Only use the same type of batteries / rechargeable batteries. Do
not mix used and new batteries / rechargeable batteries.
Remove batteries / rechargeable batteries if the product will not
be used for a longer period.
Risk of damage of the product
Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity marks
(+) and (-) on the battery / rechargeable battery and the product.
Use a dry lint-free cloth or cotton swab to clean the contacts on
the battery / rechargeable battery and in the battery compartment
before inserting!
Remove exhausted batteries / rechargeable batteries from the
product immediately.
Start-up
Note: First insert the batteries in the outdoor sensor, then the
main station.
Setting up the products
ATTENTION: First start the outdoor sensor, then the main station.
If possible, do not expose the outdoor sensor or main station to
direct sunlight. Plane it to a horizontal, level surface or mounting
on the vertical wall.
The main station can be hung by the eyebolt
4
or flip out the
stand
6
to place it on a horizontal, level surface.
Note: Main station for indoor use only.