24 GB/IE/NI
However, when starting the unit you may use the UP- or DOWN- /
button to set a forecast based on the forecast on the TV or the
internet to slightly accelerate self-regulation of the weather forecast.
Setting the barometric pressure: The barometric pressure
will indicate the absolute barometric pressure in mb or hPa accord-
ing to the default setting. Here you may now set the display to the
altitude-related barometric pressure of your location. Please ob-
tain the correct current data from the internet or the local weather
forecast. Please note, the data must be entered in the unit displayed
at the time the setting is made.
Setting the barometric pressure: The default is the official
European unit hPa. However, you may also select the unit inch of
mercury (inHg). When changing the unit at this time the indicated
value will automatically be converted to the new unit.
Temperature alarm
You have the option to define a temperature range for the outdoor sen-
sor. With the temperature alarm activated, the main station will sound
an alarm if the outdoor sensor measures a temperature outside of this
temperature range.
Activating the temperature alarm
Press and hold the ALERT button
14
for three seconds until the
temperature display flashes in the outdoor temperature field
23
.
A flashing up arrow
will appear to the left of the temperature.
Now press the UP button
8
or the DOWN- / button
9
to set
the maximum temperature for the desired temperature range.
TIP: Press and hold the UP button or the DOWN- /
button to
quickly scan ahead or back through the numbers.
To Next Page
Loading...
Need help?
General
