OWIM HG07890B-MSF User Manual

26 GB/IE/NI
of the clock, with the hour flashing. The mark will appear to
the right of the alarm time.
Set the hour for alarm W (weekday) or S (single) alarm using the
UP button
8
or the DOWN- / button
9
.
TIP: Press and hold the UP button or the DOWN- /
button to
quickly scan ahead or back.
Press the ALARM-/SET button again to confirm your entry, and he
minutes will start flashing. These can be changed in the same manner.
Activating the alarm
In clock mode press the DOWN- / button
9
. In addition to
the time a bell will appear with 1:
. Alarm 1 is now activated.
Press the DOWN- /
button again and the alarm symbol 1
will disappear. Alarm symbol 2:
. will appear. Pressing the
DOWN- /
button again will activate alarm 1 and alarm 2.
Both alarm symbols will appear:
. Pressing the DOWN- /
button a fourth time will deactivate both alarm 1 and alarm 2.
Switching off the alarm
The alarm will sound at the set time and the backlight will switch
on. When not switched off, the alarm will sound for 2 minutes
before stopping automatically.
Press the SNOOZE- / LIGHT field
2
to interrupt the alarm. The clock
display will flash
, indicating the snooze function has been
activated: the alarm will sound again after 5 minutes.
Press any button on the keypad to actually shut off the alarm.
Accessing stored data
Maximum temperatures
Press the MEM button
13
nagain and both temperature fields will show
22
and
23
next to the temperature, and MAX next to the humidity. The

OWIM HG07890B-MSF Specifications

General

Brand	OWIM
Model	HG07890B-MSF
Category	Weather Station
Language	English