CAUTION. Alternate between child’s feet every 8 hours of use and also after recharging the Sensor. Check the child’s foot
often for any signs of irritated skin.
CAUTION. Dream Sock performance may be affected by foot deformities. Because foot deformities vary widely in nature
and severity, we recommend that you consult your pediatrician before use on babies with foot deformities.
Step 3: Insert the Sensor (if not already attached)
Attach the Sensor to the Sock by lining up the notch on the Sensor with the notch on the Sock. Stretch the hole in the Sock over the
Sensor Dome.
Before use, always inspect the Sock and Sensor for damage or excessive moisture and verify that the Sock and Sensor, including
the Sensor windows, are clean.
NOTE: Ensure the Sensor is completely inserted into the Sock before use. Discontinue Sock use if you notice any damage to
the Sock.
Step 4: Position the Sock
Place the Sock on the corresponding foot (left/right) with the notch on the outside of the foot behind the pinky toe. The Sock should
NOT touch the toes.
To Next Page
