What to do if my OXO GOOD GPIPS CHEF'S PRECISION Thermometer needs to be reset?
If your OXO Thermometer needs to be reset, turn it off, remove the batteries, wait one minute, then reinsert the batteries and turn it back on.
What to do if my OXO GOOD GPIPS CHEF'S PRECISION has been exposed to rapid changes in ambient temperature?
If your OXO Thermometer has been exposed to rapid changes in ambient temperature, you can reset it. To do this, turn the thermometer off, remove the batteries and wait one minute. Then, reinsert the batteries and turn the thermometer back on.
What to do if the temperature being measured is outside of the measurement range of my OXO GOOD GPIPS CHEF'S PRECISION?
If the temperature being measured is outside of the measurement range, the OXO Thermometer will automatically display numbers when the temperature is back within the acceptable range.
What to do if the ambient temperature is outside the functional range of my OXO GOOD GPIPS CHEF'S PRECISION Thermometer?
If the ambient temperature is outside the functional range of 0°C (32° F) - 50°C (122°F), turn off the OXO Thermometer, remove the batteries, and wait 30 minutes to allow it to stabilize to a working temperature. Then, reinsert the batteries and turn the thermometer on.
Why does my OXO Thermometer go into sleep mode?
The OXO Thermometer will go into sleep mode after 3 minutes of inactivity. To turn it back on, simply move the thermometer.
Why does my OXO Thermometer automatically turn off?
The OXO Thermometer will automatically turn off after 10 minutes. Move the probe to turn it back on.
Rotate the probe to the desired angle, up to 225 degrees, for versatile use.
Utilize the notch on the back of the thermometer to easily grab the probe.
The thermometer turns on when the probe rotates. Insert probe 1/8" (3 mm) into thickest food section.
Wipe the probe after each use and the thermometer body regularly with a damp cloth.
The IP66 rating allows rinsing the thermometer in water for cleaning; do not immerse.
Loosen the battery door screw with a Phillips screwdriver to access the compartment.
Use switches inside the compartment to change between °F/°C or adjust decimal resolution.
Covers measurement range from -58 to +572°F (-50 to 300°C) and operating range from 32 to 122°F (0 to 50°C).
Details accuracy specifications and IP66 water resistance rating.
Thermometer enters sleep mode after 3 minutes and turns off after 10 minutes of inactivity.
Indicates exposure to rapid ambient temperature changes; reset by removing and reinserting batteries.
Shows when ambient temperature is outside 0°C-50°C (32°F-122°F); requires reset and stabilization.
Indicates the thermometer needs to be reset; turn off, remove batteries, wait, and reinsert.
Displayed when measured temperature is outside the measurement range; auto-corrects when back in range.
Covers manufacturing defects for two years in the US and Canada; excludes misuse and unauthorized repairs.
Approved by NSF for quality and food safety standards, including Certificate of Compliance (COCO) and EMC standards.
General| Accuracy | ±1.8°F/1°C between -4 to 302°F/-20 to 150°C |
|---|---|
| Display | Digital |
| Magnet | Yes |
| Temperature Range | -40 to 572°F / -40 to 300°C |
| Features | Timer |
| Probe Length | 4.5 inches |
| Power Source | Battery |
| Auto-Off | Yes |
To Next Page