Need help?Do you have a question about the OXO Mistral 24 and is the answer not in the manual?
General| Brand | OXO |
|---|---|
| Model | Mistral 24 |
| Category | Recording Equipment |
| Language | English |
Critical safety precautions for operating and maintaining the DMX controller.
Guidelines for proper usage environment, handling, and adult supervision.
Detailed identification and description of the Mistral 24 controller's front panel components.
Explanation of rear panel connectors for power, DMX, MIDI, and audio input.
Initial steps for enabling program recording and setting up the controller.
How to activate the record function and set the default record code for security.
Step-by-step guide to programming individual scenes and storing them.
Procedures for entering edit mode and modifying or deleting program elements.
Instructions for removing a specific program from the controller's memory.
Method to clear all stored programs from the unit.
How to clear individual or multiple scenes from a program.
Guide on removing specific steps or sequences within a program.
Procedure for adding new steps or sequences into an existing program.
How to adjust intensity values for specific steps in a program.
Methods for executing programmed chases, audio sync, and speed control.
Instructions for selecting and running chase programs using various controls.
How to utilize the audio sync feature for program playback.
Using the speed slider to adjust the playback rate of programs.
Synchronizing program execution with a standard beat or tempo.
Switching the speed mode between 5-minute and 10-minute operation.
Procedure to configure the MIDI IN channel for receiving external MIDI data.
Procedure to configure the MIDI OUT channel for sending MIDI data.
How to safely exit MIDI configuration modes.
Steps to prepare the controller for receiving MIDI file data.
Instructions for initiating the transmission of MIDI data from the controller.
Information on MIDI file dump modes and Note On/Off data handling.
How to reverse the chasing direction of scenes and programs.
Explanation and adjustment of fade time using the dedicated slider.
Using the Tap Sync button to set and synchronize chase rates.
Understanding how Master Sliders A and B control output and program selection.
Sequential program execution and control via the Speed Slider.
Synchronous program execution with individual or collective speed control.
Interpreting the segment display for intensity percentage or DMX values.
Temporary channel control and return to normal chase using Blind/Home buttons.
Changing chase modes, Master Slider B control, and temporary recording.
Using Add/Kill modes for flash buttons to manage scene and program output.
Explanation of Double Preset Mode for channel control and scene creation.
Key notes on program retention, power issues, and display error codes.
To Next Page
