CONNECTING TO NETWORK (Continued)
If you are requested to enter a WEP/WPA/WPA2
password the radio will display:
WiFi Device = the name of your wireless internet
access point.
1) Press the Scroll/Select knob and the radio will
display this password entry screen:
2) Use the Scroll/Select knob to scroll through
the characters.
Line 1 = digits - Line 2 = letters
3) Confirm the highlighted character by pres-
sing the Scroll/Select knob.
Press the Back button if you make a mistake
when entering the password
Please observe that WEP/WPA/WPA2 passwords
are case-sensitive.
Having entered the final character of your pass-
word in this way, scroll to OK and press the Scroll/
Select knob to store your password.
Note: The radio will automatically remember
your WEP/WPA/WPA2 network codes. There is no
need to re-enter the codes, unless you perform a
factory reset.
The radio will now successfully connect to your
network and the display will show:
Press the Scroll/Select knob to access the Station
list menu offering you 5 additional options.
If you select Help, the radio will provide you with
the access code needed to register the radio on-
line and inform you of FAQ solutions.
WiFi Device
[Rescan]
Key: [Set]
0123456789., OK
Key: [xxxxxxxx]
0123456789., OK
Station list
System settings
Podcasts
My Added Stations
My Added Stations
Help
My Favourites
Stations
To Next Page
Loading...
