Do you have a question about the Oxygenics CURVE and is the answer not in the manual?
Remove your existing shower head by turning it in a counterclockwise direction.
Remove old plumber's tape remnants and flush the shower pipe for 5 to 10 seconds.
Wrap plumber's tape clockwise 3 or 4 turns around the threaded end of the shower arm.
Screw the new shower head onto the taped portion of the shower arm and hand-tighten only.
Lists the included components: Rain Shower Head and Plumber's Tape. Notes that no tools are needed.
Explains the spray selector allows for easy switching to desired spray settings.
Provides contact details for installation assistance, warranty, and business hours.
| Brand | Oxygenics |
|---|---|
| Model | CURVE |
| Category | Plumbing Product |
| Language | English |
Loading...