Oxygenics SkinCare - User Manual

STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
or 1.775.420.5600
Support is also available via email at
support@oxygenics.com
Be sure to visit our website at
www.oxygenics.com
Business Hours: Monday-Friday
7:00 am to 4:30pm PST
EASY INSTALLATION
INSTRUCTIONS
STEP 3
Wrap plumber’s tape
clockwise 3 or 4 turns
around threaded end of
shower arm.
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
In a clockwise direction,
screw your new shower
head onto the taped
portion of the shower arm.
Hand tighten only.
STEP 2
Remove any remnants of
old plumber’s tape and
flush out shower pipe for
5 to 10 seconds.
WHAT’S INCLUDED
+
Fixed Shower Head
+
Plumber’s Tape
USING THE COMFORT
CONTROL
Located at the top of the SkinCare® shower
head, the comfort control regulator allows
you to adjust from a gentle stream to an
invigorating spray.
Note: The comfort control regulator is not
a shut off valve. When turned to the lowest
position, the shower head continues to flow.
This is a normal safety
feature. Unit may be
in lowest flow (gentle
stream) position
during shipping.
Please check the position
of comfort control regulator
upon installation.
SkinCare

Summary

Easy Installation Instructions

Step 1: Remove Existing Shower Head

Remove your current shower head by turning it counterclockwise.

Step 2: Prepare Shower Pipe

Remove old plumber's tape remnants and flush the shower pipe for 5 to 10 seconds.

Step 3: Apply Plumbers Tape

Wrap plumber's tape clockwise 3 or 4 turns around the threaded end of the shower arm.

Step 4: Install New Shower Head

Screw the new shower head clockwise onto the taped portion of the shower arm and hand tighten only.

Whats Included

Lists the items included with the shower head: Fixed Shower Head and Plumber's Tape.

Using the Comfort Control

Explains how to adjust the comfort control regulator for spray stream from gentle to invigorating.

Oxygenics SkinCare Specifications

General

Technology	Oxygenics
Finish	Chrome
Installation	Wall-mounted
Water Pressure	20-80 PSI
Spray Pattern	Wide
Material	Plastic