Need help?Do you have a question about the Ozito AWG-964 and is the answer not in the manual?
General| Wire Diameter | 0.6 - 0.9 mm |
|---|---|
| Welding System Type | Gasless MIG |
| Power Source | Electric |
| Model | AWG-964 |
| Brand | Ozito |
Guidance on selecting and using extension leads to avoid hazards.
Information on toxic gases produced during welding and ventilation requirements.
Protection from direct heat and ultraviolet radiation from the arc.
Recommendation for wearing welding gloves for protection.
Advice on protective clothing like overalls and aprons.
Instructions for connecting the earth clamp to the work piece for proper connection.
Steps for attaching and securely clamping electrodes into the holder.
Explanation of the automatic shutdown feature and the overload LED indicator.
Ensuring safety and proper conditions before starting to weld.
Step-by-step instructions for connecting and operating the welder.
Detailed steps for striking the arc, maintaining distance, and completing the weld.
Instructions for removing slag using the wire brush and chipping hammer.
Guidelines for cleaning, storing, and maintaining the welder.
To Next Page
