11
MAINTENANCE AND CARE
• When not in use the drill should be stored in a dry, frost free location, out of reach
of children.
• Keep ventilation slots of the drill clean at all times and prevent any foreign matter
from entering.
• If the housing of the drill requires cleaning, do not use solvents but a moist soft
cloth only.
• Blow out the ventilation slots with compressed air periodically .
Note: Ozito Industries will not be responsible for any damage or injuries caused by
repair of the drill by an unauthorised person or by mishandling of the tool.
SPARE PARTS
Limited spare parts are available subject to availability. Please contact your local
Bunnings Special Orders Desk to order the required spare parts.
Most common spare parts listed below
Spare Part Part No.
Chuck Screw SPCDR012-01
Battery Pack SPCDR012-45
Charging Stand SPCDR012-46
Adaptor SPCDR012-47
To Next Page
Loading...
