Ozito CHL-1800 - User Manual

CORDLESS
HAMMER
DRILL
18V Lithium Ion
INSTRUCTION MANUAL
CHL-1800
WHAT’S IN THE BOX
18V Hammer Drill
Charging Stand and
Adaptor
ozito.com.au
SPECIFICATIONS
Input: 18V
Chuck Size: 10mm Keyless
No Load Speed: 0-400 / 0-1,500/min
Impact Rate: 0-5,200 / 0-19,500/min
Torque Setting: 21
Max. Torque: 30Nm
Battery Capacity: 1.5Ah Li-Ion
Charge time: 1 Hour
Weight (Tool Only): 1.1kg
18V Battery
Belt Clip
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries are covered
by a 12 month warranty. Warranty excludes consumable parts, for
example: included accessories, etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
1216

Summary

WARRANTY

3 YEAR REPLACEMENT WARRANTY

Details the 36-month replacement warranty for DIY use, excluding consumables.

SPECIFICATIONS

KNOW YOUR PRODUCT

ACCESSORIES

Lists and illustrates the included accessories for the cordless hammer drill.

SETUP & PREPARATION

BATTERY & CHARGING

Instructions on how to charge the battery pack and install it into the drill.

OPERATION

KEYLESS CHUCK

Guide on installing and removing drill bits using the keyless chuck mechanism.

CONTROLS

Explanation of the drill's controls including forward/reverse, speed trigger, torque, and speed selection.

FUNCTIONS

Describes how to use the drill for drilling, hammer drilling, and screwdriving modes.

DRILLING

Step-by-step guide on performing drilling operations safely and effectively.

MAINTENANCE

SPARE PARTS

Information on how to order spare parts for the Ozito cordless hammer drill.

TROUBLESHOOTING

ELECTRICAL SAFETY

GENERAL POWER TOOL SAFETY WARNINGS - PERSONAL SAFETY

Comprehensive personal safety guidelines for operating power tools.

HAMMER DRILL SAFETY WARNINGS

Specific safety precautions for using hammer drills, including noise and impact risks.

Ozito CHL-1800 Specifications

General

Brand	Ozito
Model	CHL-1800
Category	Drill
Language	English