To Next PageTo Next Page
Need help?Do you have a question about the Ozito POWER XCHANGE PXDDS-180 and is the answer not in the manual?
General| Type | Cordless Drill Driver |
|---|---|
| Voltage | 18V |
| Chuck Size | 13mm |
| Max Torque | 35Nm |
| Speed | 2-speed |
| Weight | 1.5kg |
| Battery Compatibility | Ozito Power XChange |
| Drilling Capacity (Steel) | 10mm |
| Battery Type | Li-Ion |
Steps for making a warranty claim.
Total warranty period for the product.
Conditions that invalidate the warranty.
Procedure for inserting the battery.
Procedure for removing the battery.
How to install drill bits into the chuck.
How to remove drill bits from the chuck.
Switch for forward and reverse rotation.
Mechanism for controlling drill speed.
Setting the rotational force for screws.
Switch for selecting gear ratios.
Steps before starting drilling.
Proper grip and initiation of drilling.
Smooth movement of the bit into the workpiece.
Method for achieving specific hole depth.
Tips for setting appropriate torque levels.
Procedures for tool upkeep and storage.
System preventing battery damage.
Solutions for non-illuminating LEDs.
Solutions for short battery life.
Solutions for a locked trigger.
Solutions for the drill stopping unexpectedly.
Ensuring power supply matches tool rating.
Procedure for handling damaged power cords.
Guidelines for maintaining a safe work environment.
Precautions for operator safety.
Best practices for tool operation and maintenance.
Recommendations for hearing protection.
Information on potential health risks from dust.
Guidelines for operating the tool safely.
Steps for making a warranty claim.
Total warranty period for the product.
Conditions that invalidate the warranty.
Procedure for inserting driver bits.
Procedure for removing driver bits.
Mechanism for controlling driver speed.
Switch for forward and reverse rotation.
Steps before starting driving tasks.
Proper grip and initiation of driving.
Method for achieving proper fastener tightness.
Procedures for tool upkeep and storage.
Solutions for typical operational problems.
Precautions for electrical hazards.
Broad safety guidelines for power tools.
Safety advice specific to impact drivers.
Steps for making a warranty claim.
Total warranty period for the product.
Conditions that invalidate the warranty.
Procedure for battery installation and removal.
Procedure for attaching the rip fence accessory.
How to set cutting depth and bevel angle.
Procedure for operating the saw's power switch.
Feature for guiding cuts along a line.
Step-by-step guide for performing cuts.
Instructions for changing the saw blade.
Procedures for tool upkeep and storage.
Solutions for typical operational problems.
Precautions for electrical hazards.
Broad safety guidelines for power tools.
Safety advice specific to circular saws.
Essential safety rules for battery use.
Conditions for safe battery charging.
Rules for safe battery storage and disposal.
Precautions for electrical supply matching.
Guidelines for using extension cords.
Safety measure for electrical shock prevention.
Ensuring correct tool compatibility.
Steps for charging the lithium-ion battery.
Feature indicating battery power level.
System preventing battery damage.
Steps for making a warranty claim.
Total warranty period for the battery.
Conditions that invalidate the warranty.
Essential safety rules for charger use.
Rules for safe charger operation and repair.
Conditions for safe charger operation.
Precautions for electrical supply matching.
Guidelines for using extension cords.
Safety measure for electrical shock prevention.
Initial steps for connecting the charger.
Procedure for inserting the battery into the charger.
Understanding charger LED status lights.
Solutions for battery charging problems.
Procedures for cleaning and upkeep.
Information on warranty claims and duration.
