Need help?Do you have a question about the Ozito OZCD18V2A and is the answer not in the manual?
The mechanism for holding drill bits securely.
Collar to switch between hammer and drill modes.
Collar for setting the driving torque level.
Selector for choosing between two speed gears.
Switch to change the drill's rotation direction.
Trigger to control drill speed.
The power source for the cordless drill.
Device for recharging the battery pack.
Welcome message and overview of the tool's purpose.
Essential safety guidelines for tool operation and work environment.
Critical safety information for using the charger and battery.
Procedure for attaching and detaching the battery.
Detailed steps for charging the battery pack.
Instructions on using the drill's ON/OFF, speed, and direction controls.
How to install and remove drill bits using the chuck.
Guidance on drilling in metal, wood, and masonry.
Procedures for cleaning and storing the tool.
Details on the warranty period and what voids it.
To Next Page
General
