EasyManua.ls Logo

Ozito RHD-1550 User Manual

Ozito RHD-1550
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1500W
ROTARY
HAMMER
3
1500W
ROTARY HAMMER
1500W
ROTARY HAMMER
1500W
ROTARY HAMMER
1500W
ROTARY
HAMMER
3
ROTARY
HAMMER
DRILL KIT
1500W
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 230–240V ~ 50/60Hz
Power: 1500W
Impact Rate: 4,100bpm
Impact Energy: 5J
No Load Speed: 0-850/min
Accessory Fitment: SDS+
Drilling Capacity: Ø40mm (Timber)
Ø32mm (Masonry)
Ø13mm (Steel)
Weight: 4.4kg
RHD-1550
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase. If
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
If the tool has been operated on a supply voltage other than that specified on the tool.
If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
Rotary Hammer Drill & Side Handle
3 x Drill Bits, Depth Rod, Flat Chisel
& Pointed Chisel
Grease Tub, Dust Cover & Pin
Wrench
Kitbox
1221
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Question and Answer IconNeed help?

Do you have a question about the Ozito RHD-1550 and is the answer not in the manual?

Ozito RHD-1550 Specifications

General IconGeneral
Power1550W
Chuck Size13mm
Impact Rate0-48000 BPM
Drilling Capacity (Steel)13mm
Drilling Capacity (Wood)40mm
Power SourceCorded Electric
Voltage240V

Summary

Product Specifications

Standard Equipment Included

Warranty Information

3 Year Replacement Warranty

Details the warranty period and terms for product replacement.

Warranty Voiding Actions

Outlines actions that will void the product warranty, such as misuse or alteration.

Know Your Product

Rotary Hammer Drill Parts Identification

Identifies and labels all parts of the rotary hammer drill kit.

Setup and Preparation

Included Accessories

Details the standard equipment included with the drill kit.

Attaching the Side Handle

Step-by-step guide on how to securely attach the side handle.

Attaching the Depth Rod

Instructions for attaching the depth rod for precise drilling depth.

Installing SDS+ Accessories

Instructions for properly inserting SDS+ accessories into the drill chuck.

Using the Dust Cover

Guidance on using the dust cover accessory to catch debris during operation.

Operating the Hammer Drill

Operating Modes Explained

Explains the different operational modes: drilling, hammer drilling, and chiselling.

Using the Hammer Drill Features

Provides instructions on using the on/off trigger, speed adjustment, and general operation.

Maintenance and Care

Cleaning Instructions

Recommended procedures for cleaning the tool after use.

Gearbox Grease Replenishment

Guidance on when and how to replenish gearbox grease.

Storage and Supply Cords

Instructions for safe storage and handling of supply cords.

Description of Symbols

Environmental Care and Recycling

Spare Parts Information

Electrical Safety Precautions

General Power Tool Safety

Rotary Hammer Drill Specific Safety

Related product manuals