INTRODUCTION
Congratulations on purchasing an Ozito Arc Welder. We aim to provide quality
products at an affordable price. We hope you will enjoy using this product for
many years.
The Ozito Mig Welder OZMW90A has been designed to weld steel alloys. Its
varying current range, light weight and portability make it an ideal welder for
many jobs. It is intended for DIY use only.
With this welding unit you can now experience the many advantages of the
FLUX MIG series welding processes. This unit will enable you, with the help of
this manual and a little practice, to obtain a professional finish in welding car
bodywork, and many other uses for which you'll find it ideal.
This welder produces a direct current output (A.C) with a static flat characteristic,
enabling an arc to be struck between a continuously fed consumable electrode
(wire) and the workpiece, power for the arc is provided by a transformer which
has its output rectified to direct current. The wire is fed through the torch by
feed rollers mounted on a DC drive motor and current is passed to the wire
melts in the arc and is transferred to the weld pool in the form of droplets.
The welding result in low heat input to the workpiece, ensuring minimum heat
spread and distor
tion which combined with ease of use make them the ideal
process for a multitude of jobs par
ticularly on thin materials.
Fig. 1
To Next Page
Loading...
Need help?
General
