Ozone BV1 - Page 16

Ensure the harness bridle is correctly routed into the
reservecompartmentasshown.
Please note, the BV1 is only suitable for reserve parachutes with a short bridle.
Attachtheharnessbridlestotheparachute’sbridleusingasuitableconnectorandsecuretheends
withelastics(notsupplied).Alternatively,theparachutebridlecanbeattacheddirectlytotheharness
bridleswithaLarksfoottosaveweight.
Ensuretheparachutecontainerzipispositionedfullytotherighthandside
-wherethebridleentersthecontainer.Feedthehandlethroughthegapand
placethe deployment bagneatly within the container.The parachute lines
shouldbepositionedunderneaththeparachute.
14