Now the 3 yellow pins need to be threaded
throughtheirrespectiveloops.Startwiththe
pinthatfeedstowardstherearoftheharness.
Each pin must go through the loops in the
correctorder,withtheredlooprst.Oncethe
redloopand3smallerblackloopshavebeen
threaded, place the pin in the end retainer
loop.
Usethesameprocedureforthepinthat
faces towards the front of the harness.
Oncetherstcoupleofloopsaredone,
closethezipslightlytomakeiteasierto
threadthroughtheremainingloops.
15