08
07
SPEED SYSTEM
Alightweightintegratedspeed-lineisincludedasstandard.AwebbingForzaacceleratorspeedbarisavailable
asanoption.Thespeedsystemisalreadyinstalledbythefactorybutifyoueverneedtochangeit,forexample
whenupgradingtotheForzaspeedbarfollowthesesteps.
Firstuntiethebarfromthelines.Routethefreeendofoneofthelinesdownthroughthesmallreinforcedslit
foundonthesidepaneloftheharness.
ThenpassthelinethroughtheRonstanpulley,ensuringthatthepulleyisnot
twistedbeforeroutingthelinethroughthesmallgapintothepodcompart-
ment.
Ensurethat the linesrun cleanly between thepulleys and passon the outsideof all structuralwebbingstraps. Double-check thelines have not
inadvertentlywrappedaroundanyofthestructuralwebbingstraps.Attachthespeedbartothefootplatewiththebungeeandthentothespeedbar
linesusingabowlineknot.Repeattheprocedureontheotherside.Onceintheair,andwhenitissafetodoso,checkthatyoucanplaceyourfoot
onthebareasilyandthatthesystemoperatessmoothlyallthewaytofullspeed.
IMPORTANT: The speed bar lines must be of equal length, ensure they are not too short as this will inadvertently
activate the speed system when under tension in the air. Always double-check lengths and symmetry whilst on the
ground before ying.
RESERVE PARACHUTE INSTALLATION
The Ozium 2 has an integral reserve parachute container with its own specic parachute deployment bag. The reserve pocket is certied for
parachuteswithavolumeofbetween3and6ltr,itwillacceptmostmodernrescueparachutesincludingtheAngel140andsteerableRogallotypes.
IMPORTANT: It is strongly recommended to use the deployment bag supplied with the harness.
WARNING: Ozone strongly recommends that the reserve parachute system is installed by a qualied professional.
Always seek experienced advice if you have any doubts.
Makesureyouperformapracticethrowfromastatichangpoint.Notonlydoesthisensurethecorrectfunctioningofyourdeploymentsystemitalso
allowsyoutobecomemorefamiliarwiththeinstallationprocess.
Please note, the parachute can only be deployed with the right hand.
To install a reserve parachute you should rst pack the parachute so that it matches the shape and
dimensionofthesupplieddeploymentbag.
Inserttheparachuteintothe deployment bag and securethedeploymentbagwiththelines
inthenormalway.Dependingonthesizeofyourparachuteyoucanuseeithereyeletforthe
bestt.