PAC Stinger HEIGH10 - User Manual

Stinger HEIGH10
®
Radio Replacement Kit
2015-2021 Chrysler 300
2015-2021 Dodge Challenger / Charger
SRK-CHR15H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 1
Rev: V3
Date: 032222
®
Introduction and Features
Important Notes
Included Components
We recommend reading this manual thoroughly to familiarize yourself with
the entire process prior to beginning the installation.
1. Mounting Bucket 1 (CDJ13H-1)
2. Mounting Bucket 2 (CDJ13H-2)
3. Display Mounting Frame (CDJ13H)
4. CAN-Bus Connection Harness (MQS4PT36V2)
5. Mounting Hardware:
4- #8 X 1/2” PHP POINT TIP SCREWS
4 - #8 X 3/4” PHP POINT TIP SCREWS
1 - M4 X 8, FHP, BLACK DISPLAY SET SCREW
6. 6” Data Harness (10P-2-10P-6-HAR)
7. Main Wiring Harness (SRK-CHR16-HAR)
8. Side Brackets (CDJ13H-LH/RH)
9. Spacers (CDJ13H_Bracket Spacer) x2
10. Satellite Antenna Adapter (SAT-01)
11. AM/FM Antenna Adapter (BAA22)
12. PAC-LINK Interface Module (PL1)
13. RadioPRO Interface Module (CH4A-SRK)
14. Chime Speaker & Hardware (RPA-SPK)
15. Media Hub (USBHUB-CH1B-RCA-48)
16. Zip Ties (Not shown)
1
4
6
10
8
5
2
11
3
7
9
12
13
14
15
1. Does Not Retain:
Cluster Display Features
• Compass (when equipped with 5” or 8.4” screen)
• Clock
• Phone pop-ups
• Navigation pop-ups
• Launch Control Timers
Factory Amplier Features
• Speed Controlled Volume
• Surround Sound
Uconnect Features
• Uconnect Access Remote Start / Lock / Unlock
• SOS / Assist
• Vehicle Location Service
• WiFi-Hotspot
2. Not compatible with SRT or Hellcat trim levels.
3. Not compatible with 2015 model year vehicles equipped with drive modes.
4. EnsurethattheCH4A-SRKandPL1moduleshavebeenupdatedtothelatestversionofrmwarebeforeinstallinginto
thevehicle.RefertotheUpdatingFirmwaresectionattheendofthemanualforrmwareupdateinstructions.
5. The vehicle should be OFF and key removed during entire disassembly and installation. Turning on the vehicle during
the installation may cause error codes / check engine light.
The SRK-CHR15H is a complete radio replacement kit for the installation of the Stinger HEIGH10® modular radio in Chrysler 300,
Dodge Challenger or Dodge Charger equipped with either 5” or 8.4” factory display radios. All modules, cables and adapters
are included to retain important features of the factory system, including: steering wheel-mounted radio controls, factory
amplier, factory reverse camera, USB port and AM/FM reception. Plug & Play wiring harnesses allow for quick and easy
installation without the need to cut or splice any wiring. The display mounting panel allows mounting the 10-inch display
without modifying/cutting any part of the vehicle’s sub-dash.
NOTE: Along with the SRK-CHR15H components, additional
hardware and wire harnesses from the HEIGH10 (UN1810) kit
will also be used in the installation.
Performance Features
• Launch Control with Launch RPM
• Line Lock
• G-Force status on radio (still on instrument cluster)
SiriusXM Guardian Services
• SiriusXM Radio

PAC Stinger HEIGH10 Specifications