3. To assemble the upright tube
STEP 3A: Connect the Contact Heart
Rate Wires (17) & (83) then connect Wires
(105)(122).
STEP 3B: Slide the Upright (80) on to the
main Frame (1), then secure the Upright to
the Frame using 6 Bolts (108), 6 Washers
(5) using a 6mm Allen wrench (151).
Washer 18х9х2.0t—6PCS(5)
Bolt M8х15—6PCS(108)
10
To Next Page
Loading...