To Next PageTo Next Page
Need help?Do you have a question about the Pacific Crest PDL and is the answer not in the manual?
General| Interface | RS-232 |
|---|---|
| Operating Temperature | -30°C to +60°C |
| Channel Spacing | 25 kHz |
| Power Supply | External DC |
| Modulation | GMSK |
Covers front panel, buttons, display, LEDs, rear panel, connectors, enclosure, and system setup procedures for the PDL HPB.
Covers LPB front panel, buttons, display, LEDs, enclosure, antenna mount, and setup procedures.
Covers rover front panel, buttons, display, LEDs, enclosure, antenna mount, and setup procedures.
Explains enabling and using the AutoRover feature for automatic channel synchronization to the PDL Base.
Details enabling AutoBase for automatic channel selection on the PDL Base based on channel analysis.
Lists and explains PDL error codes and provides basic troubleshooting steps for identified issues.
Provides guidelines and safety procedures regarding RF energy exposure from PDL modems and operating precautions.
Details the data receptacle and recommended mating plug for the PDL High Power Base.
