SKU 95618 For technical questions please call 1-800-444-3353
Page 3
3. Injection Hazard. The high pressure water jet produced by this tool
can cut skin or cause injury to hands or eyes. Do not allow spray to
strike you and do not spray toward people or animals. Do not spray
the tool itself or any electrical source.
4. Burn Hazard. The engine and high pressure pump become hot
during operation. Do not touch the engine or pump until they have
cooled down after use.
Keep work area clean5. . Cluttered areas invite injuries.
Observe work area conditions6. . Do not use machines or power tools in
unsafe locations. Don’t expose to rain. Keep work area well lit.
Keep children away7. . Children must never be allowed in the work area. Do
not let them handle machines, tools, gasoline or oil.
Store idle equipment8. . When not in use, tools must be stored in a dry loca-
tion to inhibit rust. Always lock up tools and keep out of reach of children.
Use the right tool for the job9. . Do not attempt to force a small tool or attach-
ment to do the work of a larger industrial tool. There are certain applications
for which this tool was designed. It will do the job better and more safely at
the rate for which it was intended. Do not modify this tool and do not use this
tool for a purpose for which it was not intended.
Dress properly10. . Do not wear loose clothing or jewelry as they can be
caught in moving parts. Protective, electrically non-conductive clothes and
non-skid footwear are recommended when working. Wear restrictive hair
covering to contain long hair.
Use eye and ear protection11. . Always wear ANSI approved impact safety
goggles, heavy rubber boots, work gloves and hearing protection during use.
During pressure washing debris can y back in your face, or into other prop-
erty, people or animals. Use extreme caution to prevent unintended spray
injury.
Do not overreach12. . Keep proper footing and balance at all times. Do not
reach over or across running machines.
Maintain tools with care13. . Keep tools maintained and clean for better and
safer performance. Follow instructions for lubricating and changing accesso-
ries. Inspect tool hoses periodically and, if damaged, have them repaired by
an qualied technician. The handles must be kept clean, dry, and free from
oil and grease at all times.
Turn OFF power14. . Turn OFF engine and water supply when not in use.
To Next Page