SKU 95618 For technical questions please call 1-800-444-3353
Page 4
Remove adjusting keys and wrenches15. . Check that keys and adjusting
wrenches are removed from the tool or machine work surface before turning
engine on.
Avoid unintentional starting16. . Be sure the water supply is in the Off posi-
tion when not in use. Do not carry the spray handle with your nger on the
trigger, whether or not engine is operating.
Stay alert17. . Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
Take caution as some woods contain preservatives such as copper 18.
chromium arsenate (CCA) which can be toxic. When high pressure
spraying extra care should be taken to avoid inhalation and minimize skin
contact.
Check for damaged parts19. . Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate prop-
erly and perform its intended function. Check for alignment and binding of
moving parts; any broken parts or mounting xtures; and any other condition
that may affect proper operation. Any part that is damaged should be prop-
erly repaired or replaced by a qualied technician. Do not use the tool if any
switch does not turn On and Off properly.
Guard against electric shock20. . Prevent water spray into any electrical
source such as a power outlet or extension cord.
Replacement parts and accessories21. . When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are avail-
able from Harbor Freight Tools.
Do not operate tool if under the inuence of alcohol or drugs22. . Read
warning labels on prescriptions to determine if your judgment or reexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
Maintenance23. . For your safety, service and maintenance should be per-
formed regularly by a qualied technician.
Use only Cold Water and/or pressure washer detergent as the active 24.
propellant in this tool. Do not use detergents not designed for pressure
washers, caustic materials, solvents or any ammable materials in this
machine. Use of any such material can cause injury, or damage this tool or
personal property.
During use, do not allow the high pressure hose to come in contact 25.
with any hot part of the engine or pump. Damage to the hose may occur
possibly causing the hose to burst or leak under high pressure.
To Next Page