9
General Screen Layout
1. Thumbnail images: this area displays thumbnails of the frames
you have prescanned.
2. Scroll left and scroll right buttons: (scroll filmstrip thumbnails):
if more than 6 images have been prescanned, you can use the
scroll left and scroll right buttons to scroll through the thumbnail
images.
3. Film motion: (reverse eject, reverse, forward, forward eject):
move the filmstrip in the scanner.
4. Zoom in and zoom out: use these two buttons to zoom in or out
on the previewed image.
5. Move: click this button to turn the pointer into a hand icon, which
when clicked and dragged on the previewed image, changes the
portion of the image displayed.
6. Image rotation: (90°counterclockwise, 180°, 90°clockwise):
click the appropriate button to rotate the previewed image.
7. Flip horizontal and flip vertical: click the appropriate button to
flip the previewed image.
8. Black pointer, gray pointer, and white pointer: use these
buttons to set the black, gray and white points of the previewed
image.
9. CMYK or RGB value: these fields display the color values for the
single pixel below the current pointer location.
10. Auto balance: toggle this button to control whether the scene
balance algorithm is applied or not.
11. Default balance: click this button to apply the default color
balance.
12. Auto-focus: click this button to perform auto-focus for the
mounted slide or filmstrip in the scanner.
13. Undo: click this button to undo the last function performed.
14. Image window: click this button to display a second window –
the image window – it allows you to view the previewed image in
greater detail.
15. Prescan frame: click this button to perform a prescan and create
a preview of the image.
16. Prescan strip: click this button to create a preview scan of each
of the frames in the filmstrip.
17. Scan: click this button to perform a scan of the slide or of all the
selected frames in a filmstrip.
To Next Page
Loading...