PackBest C10 - Film Storage; System Composition

Ounaing
Wire,
please use
singtle-phase
three-wire
svstem
power
cord,
the
use
of
the
grid
must
have
a
reliable grounding, otherwise static electricity cannot be discharged, the human body will become a
conductor of static electricity, and feel uncomfortable through electricity shock.
3.6Film Storage
A
Warn: Please use the film produced by our company, if not so, may cause broken bag problems or
influence the effect of the packing bag, and even damage the machine
The
temperature
of
storage
should
be
0-43
C
.the
film
is
available
to
be
stored
in this
range(0-43
C.
exceed/below this range may damage the film).
Please noted, before use, this film should in its operating temperature.
The films operating temperature range are 16-43 C .Please used the film within this temperature range to
achieve the best sealing effect.
3.7 System Composition
1.Main power switch: No/OFF
The Main power switch located on the back of the machine, for turning on or off the system.
2.Start/Stop switch; NI switch
(1)Start/Stop button : start/stop machine operation.
(2)IN button: Auxiliary roll film into the roller.
3.Main power cord
Plug the power cord into the appropriate power outlet, more details please refer to 3.5 "Power
requirements".
4.Control panel
The
button
panel:
Used to
set
machine
related
values
Display
screen:
visual
operation,
to
display
all
parameters
of
the
machine
5.The side sealing
inside
are
machine
parts.
A
warning Do not open the side cover, we only suggest it's opened by our company representative
and
authorized
maintenance
personnel.
8