PackBest C10 - Recommended Settings; Maintenance & Repair; Preventive maintenance; Replace the blade

6.Film Roll Holder
It is used to install the film coil, so that the film coil can be fixed and supported.
7. Lateral sealing module
It is used to place the air pipe, blade and heating module, etc., which can inflate arnd seal the bags.
Warning: The roller temperature is very high, be careful of scalding
Warning: Please be careful and do not get rolled into the machine!
8.Film roll
Film
rolls
with
air
channels,
available
inflated
and
sealed
by
C1ON.
3.8 Recommended Settings
Cushion Type
Recommended
Recommended
Air
Recommended
speed
SIZe
Temperature
Volume
Air Cushion bag
10*20
180
25
100
Air
Cushion
Gourd
Membrane
40*32
180
200
100
Four
rows
of
air
cushion
40*33
180
170
80
4.1Maintenance & Repair
4.1Preventive maintenance
Warning:
Before
maintaining
or
repairing
the
C10,
please
do
remember
turn
off
the
machine,
and
plug
the
Main
power cord
from
the
socket.
Maintenance cycle
Detail
Description
weekly
Check&
clean
open
the
belt
cover
of
machine,
blow
off
the
dust
and
fragments;
check
if
any
abnormal
abrasion
component.
every month
Arrange
an
on-site
inspection;
Contact
Contact
the
authorized
distributor
or
our
technical
service
representative
to
check
the
machine. 4.2Replace the blade