Need help?Do you have a question about the Packo REM/DX Series and is the answer not in the manual?
Explains icons used in the manual for clarity and safety.
Details safety stickers and their meanings.
Emphasizes that only trained personnel should perform maintenance.
Safety precautions related to electrical connections and usage.
Safety guidelines for entering the milk cooling tank.
States that only recognized installers should perform installation.
Instructions on verifying the completeness of the delivery.
Safety guidelines for lifting and moving closed tanks.
Safety guidelines for moving tanks with built-on cooling units.
Details electrical, ambient, and fabrication plate information.
Provides tables of dimensions and weights for different tank models.
Illustrates and lists the main parts of a cooling unit.
Guidance on placing cooling units inside or outside for optimal air circulation.
Step-by-step method for connecting the cooling unit's pipes.
Details on setting low-pressure pressostat values for different tanks.
Table listing and describing all parts of the DX/DIB milk cooling tank.
Description of how the DX cooling system works in phases.
Table listing and describing all parts of the IB milk cooling tank.
Explanation of how the IB cooling system (Ice Bank) works.
Description of the IB cooling system's operation phases.
Step-by-step procedure for filling the ice water reservoir.
Details on IB ice thickness sensors, settings, and installation.
Emphasis on observing local regulations for electrical installations.
Procedure for setting the softstarter for the cooling unit.
Explains the H3US control relay for 3-phase networks.
Recommendation for using a differential cut-out for protection.
Power and intensity data for REM/DX and RS/DX tanks.
Power and intensity data for OM/DX and OM/IB tanks.
Guidance on selecting supply cables based on main fuse size.
Connecting to water mains for automatic cleaning systems.
Description of the automatic cleaning system's phases.
Automatic cleaning system reducing time and cold water consumption.
Types of cleaning products: base (alkaline) and acid.
Table listing parts of the standard cleaning system.
Procedure to start manual cooling using the timer.
Procedure to clean the tank manually.
Description of the three cleaning phases for the tank.
Guidelines for regular and preventive maintenance.
Procedure for cleaning the condenser to maintain cooling efficiency.
Overview of regular checks to be performed on the installation.
Guidance on self-solving problems and contacting after-sales.
Information to provide when contacting the after-sales department.
Description of the DIB cooling system's construction and operation.
Details connection points for ice water pipes on the tank.
Ensuring leakproof connections and correct pipe material.
Cooling milk with spring/ice water before it enters the tank.
Options for installing one or more pre-coolers based on milk volume.
General| Brand | Packo |
|---|---|
| Model | REM/DX Series |
| Category | Farm Equipment |
| Language | English |
To Next Page
