Pakedge Device & Software wap-c3n - Set Static IP Address and Subnet Mask; Close IP Properties Windows

5
WAP-C3N INSTALLATION QUICK GUIDE
3. Select Use the following IP Address radio button and then enter the IP address and
subnet mask. Ensure that the IP address and subnet mask are on the same subnet as the
device.
For example: Wireless Access Point
IP address: 192.168.1.250 PC IP
address: 192.168.1.10 PC subnet mask:
255.255.255.0
4. Click on the OK button to close this
window, and once again to close LAN
properties window.