Pakedge Device & Software W7 SERIES - User Manual

pakedgedevice&software inc.
W7x - Wireless Access Point Family
ENTERPRISE-CLASS, ULTRA HIGH POWER, CONCURRENT DUAL
BAND WIRELESS-N ACCESS POINT- High Capacity, Stand-Alone
and Controller Based Ready
User Guide – Version 1.2

Pakedge Device & Software W7 SERIES Specifications

General

Model	W7
Wireless Standards	IEEE 802.11a/b/g/n/ac
Frequency Bands	2.4 GHz, 5 GHz
Mounting Options	Wall, Ceiling
Security	WPA, WPA2
Antennas	Internal
Management	Web-based

Summary

FCC Compliance and Safety

FCC Declaration and Restrictions

Device compliance with FCC rules, RF emission guidelines, and use restrictions.

Wireless LAN and Health

Discusses RF energy emission within guidelines, similar to other radio devices.

Device Safety Precautions

RF Radiation Exposure and Warnings

Specifies minimum separation distance for RF compliance and installation warnings.

General Safety Measures

Lists essential safety measures to follow when using the device.

Introduction to W7 x Operating Modes

Access Point Mode

Describes the W7x's function as a central hub broadcasting Wi-Fi signals.

Client Bridge Mode

Explains connecting a client via Ethernet to receive wireless signals from an AP.

Repeater Mode

Details how the W7x extends wireless coverage by repeating signals from another AP.

System Setup and Network Configuration

System Requirements and Package Contents

Minimum computer/OS requirements and included items.

Network Configuration Options

Overview of Ad-hoc and Infrastructure network configurations.

Hardware Installation and Initial Login

Hardware Installation Guidance

Guidance on hardware setup using PoE injectors or switches.

Initial W7 x Configuration and Login

Steps to configure PC settings and access the W7x via its IP address.

Navigating the W7 x Interface

W7 x Main Menu Structure

Describes the main menu layout and its five main groups.

System Status Overview

Explains the status area displaying current information about the W7x.

Core W7 x Settings

System Group Options

Details options within the 'System' group (Status, Properties, etc.).

Network Group Options

Details options within the 'Network' group (LAN, Spanning Tree, SNMP).

Device Properties and Administration

Device Properties Configuration

Setting device name, country, and operating mode.

Administration Settings

Changing the default username and password for security.

System Maintenance and Updates

Maintenance Functions

Describes saving, restoring, and resetting W7x configurations.

Firmware and Time Updates

Steps for upgrading firmware and setting device time.

Network Settings and Protocols

LAN Settings Configuration

How to configure the W7x's IP address and subnet mask.

Advanced Network Protocols

Configuration for Spanning Tree and SNMP.

Wireless Network Configuration

2.4 GHz and 5 GHz Network Settings

Configuration for both bands, including SSID, security, and channel.

Wireless Security Options

Configuration for WEP, WPA-PSK, WPA2-PSK, and Enterprise security.

Advanced Wireless Features

Wireless MAC Filter

Allowing or blocking network access based on client MAC addresses.

Advanced Performance Tuning

Adjusting Data Rate, Transmit Power, and RTS/CTS Threshold.

Client Bridge and Repeater Modes

Client Bridge Mode Setup

Step-by-step guide to configure the W7x in Client Bridge mode.

Repeater Mode Setup

Step-by-step guide to configure the W7x in Repeater mode.

Diagnostics and Management

Diagnostics and Network Tools

Includes Ping, Traceroute, and VLAN management.

Traffic Shaping and Band Steering

Settings for traffic control and client steering.

System Logs and LED Options

System Log Overview

Displays logs recorded by the W7x.

Log Management and LED Options

Settings for managing logs and controlling device LEDs.

Appendices

Specifications

Hardware and RF details.

Technical Support and Warranty

Contact info and warranty terms.