W7x User Manual
13
3. Select “Use the following IP Address” and type the IP address and subnet mask, as in the example below. (Be
sure the IP address and subnet mask are on the same subnet as the W7x.)
W7x IP address: 192.168.1.250
PC IP address: 192.168.1.10
PC subnet mask: 255.255.255.0
4. Click “OK” to close the dialog, and click “OK” to close the Local Area Connection Properties dialog.
W7X CONFIGURATION
To configure the W7x through a Web Browser, in the address bar of the browser type the IP address of
the W7x (default 192.168.1.250) and press Enter.
NOTE: Make sure the Access Point and your computer are configured on the same subnet. To configure the IP
address of your computer, follow the steps in the previous section.
The W7x login dialog appears.
In the User Name box, type pakedge, and in the Password box type pakedgea, and click “Login”.
To Next Page
Loading...
