Pakedge Device & Software W7 SERIES - Log Management and LED Options

W7x User Manual
50
LOG
While the system log contains a history of events recorded by the W7x device, the management log
contains events triggered on the Ethernet and wireless interface. This log is a useful debugging tool when an
unknown error occurs on the system, or when you need to send a report to Pakedge technical support.
The Log page displays a history of events triggered on the Ethernet and Wireless interface.
Syslog: Choose to Enable or Disable the system log.
Log Server IP Address: Type the IP address of the server that will receive the system log.
Local Log: Choose to Enable or Disable the local log.
Click Apply to save your changes.
LED OPTIONS
This menu will allow you to turn ON/OFF the LEDs for Power, Ethernet and Wireless.