W7x User Manual
51
APPENDIX A – SPECS
HARDWARE SPECIFICATIONS
1 x 10/100/1000 Gigabit Ethernet RJ-45 port with IEEE 802.3af Power over Ethernet (PoE) support
Configurable LED Indicators for Power, Ethernet, 2.4GHz Wireless and 5GHz Wireless
Power over Ethernet (PoE) IEEE802.3af compliant 48 VDC / 0.375A
Power Supply: 100 to 240 VDC ± 10%, 50/60 Hz (depends on different countries)
DC input: 12V/2A
RF INFORMATION
Frequency Band:
o 802.11 B/G/N on 2.4 to 2.462GHz, which can be programed based on country regulations.
o 802.11 A/N on 5 to 5.805GHz, which can be programed based on country regulations.
Operating Channels:
o 2.4GHz - 11 for North America, 13 for Europe, 14 for Japan
o 5GHz – 24 Channels depending on country
Transmit Power (Typical):
o 802.11a (5.180 ~ 5.805GHz) up to 26dBm
o 802.11b (2.412 ~ 2.462GHz) up to 29dBm
o 802.11g (2.412 ~ 2.462GHz) up to 29dBm
o 802.11n (2.412 ~ 2.462GHz, 5.180 ~ 5.805GHz) up to 26dBm
Receiver Sensitivity (Typical):
o 802.11a (5.180 ~ 5.805GHz) up to -93dBm
o 802.11b (2.412 ~ 2.472 GHz) up to -98 dBm
o 802.11g (2.412 ~ 2.472 GHz) up to -93 dBm
o 802.11n (2.412 ~ 2.472 GHz, 5.180 ~ 5.805GHz) up to -93 dBm
OPERATIONS
Operation Modes:
o 2.4/5GHz Have independent operation modes.
o Access Point/Client Bridge/WDS Bridge/WDS AP/Repeater
Up to 16 SSID
Supports 802.1q VLANs
Spanning Tree Supports 802.1d Spanning Tree Protocol
IP Auto-configuration – DHCP client
Transmission rate options:
To Next Page
Loading...
