Pakedge Device & Software W7 SERIES - Management and Security; Environment; Mechanical

W7x User Manual
52
O 2.4GHZ – N ONLY, B/G/N MIX, B ONLY, G ONLY
O 5GHZ – N ONLY, A/N MIX, A ONLY
MANAGEMENT AND SECUR ITY
 User Power Control Adjustment by dBm
 Web-based configuration (HTTP)/Telnet
 Upgrade firmware via web browser
 Reset Button: to reboot (press 1 second); to reset to Factory Default (press and hold for 10 second)
 System Monitoring Statistic and Event log
 Traffic Measurement Per interface
 Auto-channel Selects least congested channel
 Bandwidth management
 Backup & Restore settings through Web interface
 QoS WMM
 WEP/WPA/WPA2/ WPA MIXED Encryption
 WPA-PSK using TKIP or AES / WPA-EAP using TKIP
 802.1x Authenticator
 SSID broadcast enable/disable
 MAC Address Filter
 WLAN L2 Isolation (AP mode only)
 Wireless Client connected list
ENVIRONMENT
 Temperature Range: 0 to 50° C (32° to 122° F)
 Storage: -20 to 60° C (-4° to 140° F)
 Humidity (non-condensing):
o Operating: 90% or less
o Storage: 90% of less
MECHANICAL
 Dimensions – 9.142” x 6.242” x 1.438” (L x W x D)
 Weight – 17.4 oz.
 Housing – 14 gauge anodized aluminum electronic housing.
