W7x User Manual
24
MODE-SPECIFIC SETUP
This section describes the settings for your W7x in the three available modes:
Access Point
Client Bridge
Repeater
ACCESS POINT MODE
The options in the main menu of the W7x change depending on the current operating mode of the W7x. The main
menu options discussed in this chapter are those available in Access Point mode.
In this mode, the W7x simultaneously broadcasts a Wi-Fi signal on both a 2.4GHz and 5GHz that clients can
associate with. As shown in the figure below.
W7
Wireless Access Point Mode
5GHz Signal
5GHz Signal
2.4GHz Signal
2.4GHz Signal
Laptop
Laptop
Touch Panel
Tablet
Phone
To Next Page
Loading...
