W7x User Manual
41
2.4GHZ AND 5GHZ WIRELESS
In Repeater mode, the W7x main menu has the following options, to be described in detail
in the sections that follow.
NETWORK SETTINGS
802.11 Mode: Choose the setting that corresponds to the type of wireless clients connected to your
network: B, G, N, B/G or B/G/N (on the 2.4GHz) or A, N or A/N (on the 5GHz). If you aren’t sure which
type(s) of clients will access the wireless networks, it’s recommended to choose B/G/N Mixed (on the
2.4GHz) or A/N Mixed (on the 5GHz) for best performance.
NOTE: When set to a mixed mode ALL devices connected to the wireless will use the mode that is
compatible for ALL devices. Example – If you have the 2.4GHz Wireless set to B/G/N Mixed and a devices
connects using G, all devices will be connected at G speed.
SSID: SSID is the name the W7x will broadcast over the wireless network to identify the Access Point. You
can set the SSID in either of two ways: type a name in the “Specify the static SSID:” text box (maximum
length 32 characters), or click “Site Survey” to perform an automatic Site Survey. A new window will
display the site survey utility. The W7x will scan the 2.4GHz frequency for devices currently broadcasting
Network Settings
Wireless MAC Filter
Advanced
Client List
To Next Page
Loading...
