pg. 34
WK-1x User Guide
• Security Profile: Select a security profile that has already been defined under the Security Profiles
tab.
Manual IP Settings
• IP Address: Enter in the IP address the access point will be used on.
• Subnet Mask: Select the class of the guest network. 255.255.255.0 is the standard setting and is
selected by default.
Manual IP Settings
• Starting IP Address: This is the beginning of the DHCP range used on the guest network. If you
have multiple access points, you can give them the same DHCP range because the guest network
of each access point will be independent of one another.
• Ending IP Address: This is the last IP address available on the DHCP range.
• DNS Server IP: The DNS Server IP can be set to an external DNS or to the router’s IP address if
the router provides a DNS server.
To Next Page
Loading...
